| 1. | Reactor pressure vessel
反应堆压力壳 |
| 2. | Positioning of moving table for checking screw holes of nuclear reactor pressure vessel
核反应堆压力壳螺栓孔检测自动小车的定位 |
| 3. | Pressurized water reactor pressure vessel - the principle of selecting materials and the basic requirements of the materials
压水堆压力容器选材原则与基本要求 |
| 4. | The reactor pressure vessel is about 12 metres high and has a 20 cm thick steel wall with an inner diameter of about 4 metres . it weighs about 314 tonnes
压力壳的高度约12米内径约4米壁厚达20厘米约重314吨。 |
| 5. | The shell parts of reactor pressure vessels have been often fabricated with formed plates welded together , especially in usa and japan
反应压力容器的壳体，历来常常是用成型钢板焊接而成的，在美国和日本尤其如此。 |
| 6. | The reactor pressure vessel is about 12 metres high and has a 20 cm thick steel wall with an inner diameter of about 4 metres . it weighs about 314 tonnes
压力壳的高度约12米、内径约4米、壁厚达20厘米、约重314吨。 |
| 7. | The fuel assemblies which form the reactor core , are loaded into a specially fabricated cylindrical steel pressure vessel the reactor pressure vessel
由燃料组件构成的反应堆堆芯放置在一个特制的圆柱体钢质压力容器反应堆压力壳内。 |
| 8. | The primary coolant system of a 900 mw class reactor consists of the reactor pressure vessel and the primary circuit with 3 identical loop top figure
一个900兆瓦的反应堆主冷却剂系统上图是由压力壳及三个相同的环路相连组成即一回路。 |
| 9. | The fuel assemblies which form the reactor core , are loaded into a specially fabricated cylindrical steel pressure vessel ( the reactor pressure vessel )
由燃料组件构成的反应堆堆芯放置在一个特制的圆柱体钢质压力容器(反应堆压力壳)内。 |
| 10. | The primary coolant system of a 900 mw class reactor consists of the reactor pressure vessel and the primary circuit with 3 identical loop ( top figure )
一个900兆瓦的反应堆主冷却剂系统(上图)是由压力壳及三个相同的环路相连组成(即一回路) 。 |
